The operation process of the straw baling machine/Alfalfal Hay Baling Machine involves multiple steps. The following is a detailed operation process:1. Raw material preparation: The collected straw is screened to remove impurities and unqualified straw. Then,the straw is crushed into small segments with a length of 20~30 mm using a grass cutter or a kneading machine.2. Drying treatment: For straw with a high moisture content,drying treatment is required to reduce its moisture content. The moisture content of the dried straw should be controlled within the range of 15~25%.3. Crushing treatment: The dried straw is further crushed into smaller particles,which is helpful for subsequent mixing and pressing.4. Mixing treatment: The crushed straw particles are mixed with an appropriate amount of adhesive to increase the strength of the block product. The selection and use of the adhesive need to be adjusted according to the specific situation.5. Pressing molding: The mixed straw particles are fed into the feed port of the straw baling machine/Alfalfal Hay Baling Machine. The material is forced to be extruded from the mold in blocks to form straw blocks of a certain specification. During the pressing process,it is necessary to pay attention to controlling parameters such as pressure and temperature to ensure the quality of the straw blocks.6. Cooling treatment: The pressed straw blocks need to be cooled to reduce their temperature and stabilize their structure. The moisture content of the cooled straw blocks cannot exceed 14%.7. Finished product quality inspection: The pressed straw blocks are quality inspected and tested to ensure that they meet the relevant quality standards and requirements. The quality inspection content may include appearance,size,density,strength and other aspects.8. Packaging and storage: The straw blocks that meet the requirements are packaged and stored for sale or transportation. When packaging,attention should be paid to moisture-proof and shock-proof measures to protect the quality of the straw blocks.In general,during the entire operation process,Straw Baling Machine is necessary to strictly abide by the operating procedures and safety requirements of the equipment to ensure the safety and stability of the production process. At the same time,it is also necessary to adjust and optimize the operation process according to different straw types and product requirements.